Monsters Capture More Wipes And Cut Through Them Better

Request a Quote Today

Screen-Shot-2013-09-10-at-3.50.20-PMWall Mounted Configuration
Muffin Monster®

This legendary sewage grinder has the power to tear through the toughest solids. The dual shafted grinder turns rags, plastics, leaves, branches, clothing and debris into small particles that flow easily through pumps and systems. The grinder is positioned in front of the influent pipeline to grind all sewage and debris as it enters the wet well. The Muffin Monster fits to the wall of almost any pump station thanks to our custom made stainless steel guide rails and support base. It also has built in overflow bar racks so if wastewater surges it can safely pass up and over the grinder while rags and wipes are caught and retained by the bar rack.

NEW Delta-P* side rails for high-flow and high-capture rate of wipes; wipes-ready cutters designed to grind debris to a size perfect for sewer pumps (*patent pending technologies).

OPTIONS: Baldor immersible motor; custom guide rails; grinder lifting bail and chain; 7, 11 or 13 tooth cutter options; for flows over 1-MGD use the wall-mounted Channel Monster model CMD1205.

Request a Quote Request Literature  Watch Video


Muffin-Monster-in-channel-pump-protectionIn-channel Configuration
Muffin Monster®

The Muffin Monster easily installs in gravity fed sewer channels almost anywhere – and we mean anywhere – on the wall of a pump station, in a deep channel or in a dedicated grinder manhole. The grinder uses an incredibly efficient 3 or 5-hp (2.2 or 3.7 kW) motor and generates a ton of cutting force at peak loads. Grinders are installed upstream of the pump. The Muffin Monster in-channel is also extremely easy to install. Bolt in the custom made support frame we provide. Slide the grinder into place – and that’s it you’re grinding sewage!

OPTIONS: Baldor immersible motor; custom JWCE made stainless steel frames to narrow a channel or to replace a comminutor as we did in this photo; custom overflow bar rack for peak flows.

NEW Delta-P* side rails for high-flow and high-capture rate of wipes; wipes-ready cutters designed to grind debris to a size perfect for sewer pumps (*patent pending technologies).

Request a Quote Request Literature  Watch Video


Channel-Monster-flushables-protectionHigh Flow In-channel
Channel Monster®

The patented Channel Monster integrates rotating screening drums with proven Muffin Monster grinder technology. The system accommodates high-flows while shredding solids (such as rags, trash, rocks and disposable wipes) into particles that flow harmlessly through pumps, pipes and processes.

NEW Perforated Screening Drums* for maximum capture rate of wipes and other debris. (*patented technology).

OPTIONS: Extended motor shafts; Baldor immersible motor; custom JWCE made stainless steel frames to narrow a channel; overflow bar rack for peak flows.


In-line-flushables-grinderDry well, In-line

Muffin Monster® or Macho Monster

This in-line sewer grinder can fit almost anywhere – underground, on the ceiling, upside down, in a closet or just about anywhere you need to grind solids and debris to keep the wastewater flowing smoothly. In-line Muffin Monsters and Macho Monsters are installed anywhere upstream of the pump and can even be installed right in front of the pump’s inlet. Wastewater will flow through the grinder via gravity or via pump suction.

OPTIONS: Baldor immersible motor; 7, 11 or 13-tooth cutters depending on the particle size needed.


Sewage-Grinder-ManholeManhole Configuration

Muffin Monster Manhole®

Dig a hole and you’re done! The Muffin Monster Manhole (M3) makes it easier to install a grinder in sewage lines. This fiberglass reinforced polyester (FRP) manhole has the exclusive Muffin Monster grinder that shreds troublesome solids and eliminates costly pump breakdowns. Try to install this grinder manhole as close to the sewer pumping station as possible. The M3 is customizable based on site requirements. The manhole diameter is 4’ (1.2m). The depth of the manhole can reach up to 30′ (9m) and in some cases more.

NEW Delta-P* side rails for high-flow and high-capture rate of wipes; wipes-ready cutters designed to grind debris to a size perfect for sewer pumps (*patent pending technologies).

OPTIONS: Custom inlet/outlet pipeline size; choice of manhole top – either a traffic manhole cover or a lid hatch; Baldor immersible motor; extended motor shaft; lifting bail (shown in the photo).


Monsters Grind Wipes Better,
They Also Remove Them Better

Leave a Reply